Tuesday, 12 June 2018

Change from drilling to mixing in under 2 minutes – how to attach you Digga cement mixer

The Digga cement mixer is a valuable attachment to own thanks to its versatility - doubling up your Digga drive unit. It attaches simply to your Digga drive in a matter of minutes so you can switch from drilling to mixing quickly and easily.

How to attach you Digga cement mixer:

  1. With your Digga auger drive attached to your machine, remove any Digga augers from the auger drive unit. 
  2. Secure the drive cradle onto the frame using supplied pin.
  3. Place mixer bowl on the drive unit.
  4. Fasten pin and lynchpin to secure mixer bowl.
  5. Set the angle to 45 degrees and the unit is now ready for use.
This video shows the Digga mixer being attached to one of our drive units to install posts. 



If you have any queries or concerns regarding the fitting or operation of your Digga mixer, contact your local Digga dealer.