Welcome to the Digga blog

Even though a key feature of the 4in1 bucket is low maintenance, there are a couple of checks you can do before each use to make sure you work efficiently and safely. We recommend you carry out the following steps on a regular basis to ensure the best performance of your 4in1 bucket: Check if all your safety stickers are in place, understood and followed correctly. If you are unsure about the signage, all the correct information is provided in your operator’s manual of the 4in1 bucket. Make sure that all nuts and bolts are tightened on your linkages and pins. Check the bucket’s hydraulic fittings and hoses for any leaks and make sure that no leaks are present. Check for any wear and tear on your pins, linkages and cutting edges of your 4 in 1 bucket. If you find excessive play in your pins and linkages or you have a worn-down cutting edge you can refer to your operator’s manual or get in contact with us to replace or repair any damage or excessively worn parts. Simply...

A Digga 4 in 1 bucket is arguably one of the most versatile earth moving attachments available for both construction and agricultural users alike. As the name suggests, a 4 in 1 bucket enables you to perform 4 different functions which Digga reference as standard bucket operation, grappling, levelling and dozing. A 4 in 1 bucket adds great value to the operators business and machinery over a standard bucket: Standard bucket operation When the bucket is fully closed the Digga 4 in 1 bucket can be used as a general purpose bucket for moving dirt and material etc. Digga tip: If you are dumping into a truck you can dump at a greater height than a standard bucket by opening the floor to release the material.  Grapple operation  With the bucket above an object, open the floor sufficiently and lower the bucket down so that the object is between the jaws. When you close the floor, the object will become clamped between jaws so you can lift and move. Digga tip: Always u...

A powder coat finish offers greater resistance to chipping, scratching, fading and general wear to the surface than other finishes. All our attachments are powder coated which gives them better protection and durability. Powder coating can give a much cleaner coverage of the bucket than a standard wet coat paint. Here we tested that by sticking two buckets out in the weather for 4 weeks. We chose buckets because they have a lot of angles and are easily comparative when on display in dealer showrooms and yards. So, we set up a test of 2 buckets.  The experiment. We chose 2 Digga buckets that were the exact same product only we powder coated one and gave the other a standard wet coat paint finish. To start with the buckets appeared pretty identical and it isn't obvious which finish is which. We left the buckets outside for 4 weeks. We didn't use them, we simply left them open to the elements of the Australian weather - similar to buckets left on display in the y...

The durable, strong and 100% Australian made Digga 4 in 1 bucket features a ‘wear plate standard’ hardened steel floor and comes complete with a heavy duty, fully welded grill to provide clear vision of bucket front edge. With cutting widths from 880mm to 2200mm, the Digga 4 in 1 bucket is available for mini loaders, skid steers and tractors. Models from 1450mm are available with optional reversible bolt on cutting blades which fit on all 3 edges of the bucket. As the side edges of your bucket will naturally wear faster, why replace the whole blade when you can just replace the worn sections? With the optional Digga reversible cutting blades for your 4 in 1, you can replace wear parts section by section saving you time and money. With our 7 day money back guarantee ou can put your trust in Digga 4 in 1 buckets. We're so confident in the quality and durability of our range, that if you try it and don't like we'll give you your money back! For more information and to re...

The Digga 4 in 1 bucket is a practical solution to tackle many applications in construction and agricultural job sites. Ace Rental  is an equipment rental company based in South East Queensland. They supply a range of backhoes, graders, excavators and skid steer loaders with earth moving attachments to the Gold Coast, Brisbane and all across the south east Queensland region to a mix of customers from different industry sectors. Company founder and Managing Director Mick Sheldon has been in the earth moving industry for over 31 years and opened Ace rentals in March 2003. Mick has built up his business reputation by supplying quality earth moving machinery equipment to a demanding work sector. To continue to meet his customer needs, the business regularly upgrade and replace their machinery with new models and when Ace Rentals purchase any new machine, they often come direct from the dealer with buckets and other attachments already fitted. Over the 15 years that Ace Rental...