Welcome to the Digga blog

Screw piles or helical piles are installed to an engineered torque specification. By the time installation torque is reached and the operator stops the machine, the screw pile has built up rotational energy - similar to a rubber band on a wind up model aeroplane. This energy that is stored in the anchor needs to be released before the drive unit is disconnected. The ECV bypasses the stored energy allowing the anchor to “unwind” in a controlled manner. Without this valve, the pressure contained when holding the pile in place would be forced up the pile and into the drive unit resulting in potential damage & costly repairs for the motor and gearbox. See the diagram below, the red arrow demonstrates the force of the energy up the screw pile. Digga's flow reversal bypass valve (Energy Control Valve - ECV) is fitted as standard to Digga Screw Anchor Drives and can be retro fitted to drilling drives as required. The Digga ECV effectively protects the motor in your dr...

It is said that the first recorded use of a screw pile was by Alexander Mitchell, a brick maker and engineer from Ireland who coined the term ‘screw-pile’ in 1833. Initially the concept of screw piling was used to provide solid foundations for lighthouses in soft soil and provided enough holding power to safely moor ships in the harbour. The original screw pile concept cannot be officially confirmed but in the April 1848 issue of the Civil Engineer and Architects Journal the article highlights the mechanics of the bearing power of screw moorings and screw piles which Alexander Mitchell is argued to have introduced:  "The origin of the screw-pile was the screw mooring, which was designed for the purpose of obtaining, for an especial purpose, a greater holding power than was possessed by either the ordinary pile or any of the usual mooring -anchor blocks, of however large dimensions.... whether this broad spiral flange, [or ’ground screw,’ as it may be termed] were fixed...

What is a screw pile? A screw pile is also known as a helical pile, helical anchor, helix pier, screw anchor, helical pier, torque pile and/ or torque anchor. What is screw piling?  In unstable grounds when a traditional cast-in-place foundation system is not possible, screw piling offers a foundation support system for an ever increasing number of applications. Screw piling is the application of a screw pile into the ground. A screw pile is a factory manufactured steel foundation system consisting of a central rod with one or more helix shaped blade plates and a bracket at the end that allows attachment to a structure. The tip is cut on an angle to allow it to penetrate the ground as a pilot. The pile has 'flights' which are flat in pitch to help the pile pull itself into the ground with minimum downforce applied. With the use of an excavator and a hydraulic screw anchor drive motor attached, the screw pile is screwed into the ground to the desired compression torque...

Screw piling comes with a range of advantages and their application continues to grow as we continue to build and develop marginal sites; from the instant foundations of manufactured homes and pre-engineered metal buildings to axial compression and lateral tension load supports. There are a number of benefits to screw piling over traditional methods and we often here industry experts saying helical piling is more efficient and better for the environment. Here we dig a little bit deeper to look at some of the pros to screw piling. Screw piling is quick to install - providing the job brief has clearly defined the parameters effectively, screw piling can be completed efficiently. There is no requirement for cement, waiting on setting times or digging out the ground, so you can move straight onto the next one without having to hang about. Measuring and recording - one of the most important features of screw piling is the ability to verify the load capacity during the installation ...