How to Operate A Digga Bucket Broom
Having trouble operating your Digga bucket broom? There are a few tips and tricks when it comes to brush adjustment & height, rotation direction and the broom emptying procedure. We've summarised them for you below. Direction of travel and brush rotation Always sweep at a high enough brush speed and low ground speed to effectively discharge the material being swept. Brush height adjustment Remove the handle pin, twist the handle, and replace the pin. Re-adjust the axle to the correct height using both handle adjusters. Return handles to their original position. Correct Brush Height Set the height of the brush so the bottom of the brush is approximately 30mm lower than the bucket cutting edge. The brush must be level. Emptying Procedure When the bucket requires emptying, stop the rotation of the brush, lift your loader arms and crowd the bucket forward so the Bucket Broom hood swings away from the bucket. Examples of Damaged Bucket...