The Digga ECV and pile kick back when installing screw piles.
![Image](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjiwEqQRKPLTDvVH2LogAVuc9WjffnmjcT8yqKhYwE0cHGqhw0AnIEEWYXv9SXXnw3CRzCwkc-1c7UEB87yfcaoTuztbNhyykQrhMHhDVKiyYV0lEBOHEvAFsM2maDNwtCEkEVDyOyG4cI/s1600/ECV+Valve+%25282%2529.jpg)
Screw piles or helical piles are installed to an engineered torque specification. By the time installation torque is reached and the operator stops the machine, the screw pile has built up rotational energy - similar to a rubber band on a wind up model aeroplane. This energy that is stored in the anchor needs to be released before the drive unit is disconnected. The ECV bypasses the stored energy allowing the anchor to “unwind” in a controlled manner. Without this valve, the pressure contained when holding the pile in place would be forced up the pile and into the drive unit resulting in potential damage & costly repairs for the motor and gearbox. See the diagram below, the red arrow demonstrates the force of the energy up the screw pile. Digga's flow reversal bypass valve (Energy Control Valve - ECV) is fitted as standard to Digga Screw Anchor Drives and can be retro fitted to drilling drives as required. The Digga ECV effectively protects the motor in your dr