Welcome to the Digga blog

It is important to service your Digga drive unit and change the oil regularly as per the owners manual. This will ensure longevity and performance of your drive. The oil in your drive unit is independent to your hydraulic system. Oil from your machine does not lubricate your drive unit. As a result your auger drive requires regular oil changes to remain in perfect working condition. The images below illustrate the importance of regular servicing of your auger drive in accordance with the owners manual. The 3 drive units were tested in our Hydraulic Cyclic Testing Unit where 10 years of wear and tear was simulated. Oil was changed in the drives at different intervals illustrating the wear caused by neglect. Changing the oil and a regular service of your Digga drive unit is crucial to its longevity and performance. For more information on the Digga Service offering visit  www.digga.com/service-spares

The Digga excavator cradle hitch was designed and manufactured to improve operator and workers safety when manoeuvring around sites whilst also providing a simpler connection to augers and piles. The double pin hitch with drive unit cradle allows the operator to angle the drive up to 90 degrees with greater support given by the cradle so it is easier and more stable when connecting to augers or anchors. The cradle also acts as a support mechanism when manoeuvring around the work site allowing the drive unit to rest on the cradle, stopping it from swinging around over uneven terrain. Designed and manufactured to suit the size of the different drive units available, the hitch can be ordered with loose or fixed pin options and suitable for use with PD3 – PD50 Digga drive models . When drilling you should lift the cradle up and away from the drive unit. Do not drill with the cradle resting against the drive unit. This will damage the cradle hitch and your auger drive. See the co

Bruno from BGL Solutions has worked with Digga Attachments for a long time, take a look at which attachments he uses for his Landscaping business and find out why the Digga Power Rake is his favourite tool: “I’ve been involved in Landscaping at an early age back in Portugal, where I grew up, and always used to work with Digga attachments there too. When I moved to Australia in 2008, I started my business BGL Solutions in Katanning WA as a garden maintenance business. As we grew over the years, we started buying more and more machinery and equipment for landscaping. Today the business has grown to a reasonable size with a mini loader, an excavator, a skid steer loader and big industrial mowers. The Digga Attachments that we own are the Digga Power Rake for our skid steer as well as 250mm, 600mm, and 900mm augers, a bucket broom, a stump grinder and a trencher for our mini loader. The first attachment I purchased for BGL Solutions was a Digga Stump Grinder. I’ve been

Are you having trouble drilling in hard rock? We can help you out with some tips to make your job easier.. and more efficient! Without damaging your drillhead or wearparts. Let us explain why rock drilling may cause difficulties and issues when not carried our correctly: When drilling rock or frost for extended periods of time, air is trapped in the hole creating an oven effect. The trapped temperature and friction causes the wearparts and pilot to heat up to an extreme temperature, causing them to melt. It will damage the drilling head and can result in the face of the rock to 'glaze over' and become an even harder surface. This is why we recommend that you periodically remove the auger from the hole to allow fresh air back in the hole every 5 minutes. This means - stop drilling and bring the auger head to the surface to allow air into the hole. Below is an example of an auger, which was left down the hole for too long. While it may seem excessive to have to bring