Digga Australia Welcomes Yeomans Plow Co to the Family

-
Image
Tuesday, 10 March 2026 We are pleased to announce another exciting milestone for the Digga Australia Group. Digga Australia has officially acquired Yeomans Plow Co, one of Australia’s most respected and recognised agricultural equipment brands. This important development further strengthens our long-standing commitment to Australian manufacturing while supporting our continued expansion into the agricultural sector. Yeomans Plow Co has played a significant role in Australian agriculture for more than 75 years. Renowned for its industry-leading soil management and land regeneration equipment, the Yeomans brand has helped generations of Australian farmers improve cultivation and soil management equipment and enhance the long-term productivity of their land. Through practical engineering and proven performance in the field, Yeomans equipment has earned a reputation for reliability and durability across farming operations throughout the country. As part of this exciting new chapter, ...
Post a Comment

How do I avoid damage to the drive hood?

-
In order to avoid damage to your auger drive, it is important to follow the correct drilling procedure. We recently saw a damaged hood with the lid peeled back as a result of incorrect operation.

Drilling with the cradle resting against the drive unit coupled with side load can create enough force to bend the hood or peel the lid off.


Therefore, it is essential to perform the drilling operation without resting the drive cradle against the drive unit, as shown in the picture above.

The drive unit is a pendulum hung attachment designed to swing freely left right, forward and back, which is why, when drilling correctly, the cradle should be positioned up and away from the drive unit allowing the drive and auger to swing freely, as shown below.

To find out more about the correct drilling procedure, consult our manual. If you are having trouble, need replacement or service to your Digga products, please contact our service and spares department.

Comments

Post a Comment

Popular posts from this blog

How to Operate A Digga Bucket Broom

-
Image
Having trouble operating your Digga bucket broom? There are a few tips and tricks when it comes to brush adjustment & height, rotation direction and the broom emptying procedure. We've summarised them for you below. Direction of travel and brush rotation Always sweep at a high enough brush speed and low ground speed to effectively discharge the material being swept. Brush height adjustment Remove the handle pin, twist the handle, and replace the pin. Re-adjust the axle to the correct height using both handle adjusters. Return handles to their original position. Correct Brush Height Set the height of the brush so the bottom of the brush is approximately 30mm lower than the bucket cutting edge. The brush must be level. Emptying Procedure When the bucket requires emptying, stop the rotation of the brush, lift your loader arms and crowd the bucket forward so the Bucket Broom hood swings away from the bucket. Examples of Damaged Bucket...
Read more...

Rocky's Excavations review the Digga Slasher

-
Image
Rocky's Excavations and the Digga Slasher Rocky Toohey and Bregan Lockett business owners at Rocky's Excavations explained, their most used Digga attachment is the Slasher - for land clearing, grass and weed slashing.   “The slasher is always impressing our customers with just how much it can slash and the different types of weeds and lantana it removes so quickly. The Digga slasher removes small trees cutting them up to nothing. Working on acreage properties in the summer the Digga slasher is our most requested attachment for land maintenance, fence line clearing and acreage upkeep.”   Benefits of the Digga Slasher Built for slashing and clearing grasslands and low-level shrubbery the  Digga Slasher  is the introductory offering in the Digga range of forestry and vegetation management attachments.  It is perfect for smaller property maintenance, clearing light scrub, tidying fence lines, general landscaping, roadway maintenance and parks ma...
Read more...

How to Replace DR Auger Rock Picks (Dedicated Rock Augers)

-
Image
Rotating rock picks, are the auger teeth used on our Digga dedicated rock augers (DR) for drilling from soft rock to hard fracturable rock. Here are some things you can observe to determine whether the rock picks are worn: The teeth need to rotate while drilling to maintain an efficient cutting tip. The tungsten tip and tooth should be evenly pointed. Poorly maintained teeth reduce cutting efficiency and wear out faster costing time and money. We recommend you replace worn teeth immediately! Tip: the outside teeth (C) will wear the fastest as they are travelling the greatest distance so will need replacing more often. Try swapping the outer tooth for an inner tooth to keep the wear even. Always use your best teeth on the outside pockets. Here are some examples or rotating rock picks in various states of wear. Tooth A has not been rotating in the pocket and as a result the tooth is uneven and will cut poorly. We recommend changing this tooth. You may also notice if the tungsten tip has...
Read more...